IFYIL GT-15, User Manual

Page: 55 / 100

54
3. PELLETS
Wood pellets are manufactured by hot-extruding compressed sawdust
which is produced during the working of natural dried wood. The compactness
of the material comes from the lignin which is contained in the wood itself, and
allows the production of pellets without the use of glues or binders. Depending
on the wood varieties and mixtures, the pellet varies.
Wood pellet fuel with quality ENplus-A1 + A2 should be used.
Definitions ENplus-A1 ENplus-A2
Diameter 6 mm 6 mm
Lenght ≤ 30 mm ≤ 30 mm
Net Calorific Value
> 16,5 MJ/kg
> 3941 kcal/kg
> 16,5 MJ/kg
> 3941 kcal/kg
Moisture Content < % 10 < % 10
Ash Content < % 0,7 < % 1,5
Density > 600 kg/m3 > 600 kg/m3
Storage of pellet fuel;
Pellets should be kept in the dry, not too cold area. Care should be
taken to store and transport pellet bags. Pellet fuel breakage should
be avoided.
Dear Consumer;
In case of using pellets with chemical substances such as MDF and
chipboard, your product will be out of warranty as the device may be
damaged.
Defined fuel must be used in order to prevent damage to the electronic
and mechanical parts running inside the device.