summit wireless instructions
Charge
To charge your Summit Wireless Earbuds, connect the micro USB end of the included
charging cable to the port at the end of the wireless hub and the USB end to your
preferred USB outlet. The LED will light red while your earbuds are charging and will turn
off once they are fully charged.
8
Play Music
1. Press the Play button to begin playing your music.
2. While music is playing, press Play quickly to pause it. Press Play quickly again
to resume.
3. Quick-press the Volume Up or Volume Down buttons to control your audio
volume.
4. Press and hold the Volume Up or Volume Down buttons to track forward and
back through your playlist.
Take Calls
1. Press the Play button to answer an incoming call.
2. Press and hold the Play button for three seconds to send an incoming call
to your voicemail.
3. Press the Play button during a call to disconnect.
5
6
Power and Pair
1. Press and hold the Power button until the LED flashes red and blue.
2. Turn on your device’s Bluetooth® connection and select “IFROGZ Summit”. Complete
any additional pairing steps based on your device. The LED will flash blue every five
seconds while your earbuds are on and paired.
3. To turn your earbuds off, press and hold the Power button for six seconds. The LED
will flash red until they are powered off.
4. The next time you turn on the earbuds they will automatically connect to your device.
NOTE: If you are pairing with a new device, with your earbuds off, press and hold
the Power button for five seconds until the light flashes red and blue, indicating
pairing mode.
4
Summary of Contents for Summit Wireless
Page 1: ...Manual ...
