31
change the appearance of newly galvanized
surfaces to grey or black with white or grey
deposits. This does not affect the protective
properties of the finish.
To slow the dulling from road salt exposure,
wash the trailer after each journey.
8.3 HIGH PRESSURE
POWER WASHING
When using a high-pressure power wash
on the body, only use it to rinse the surface
prior to and after a hand wash. The jet
nozzle should be placed no closer than
50cm from the body surface and at least 15
degrees from perpendicular to the surface.
The nozzle should not be directed at the
compartment and entrance door gaps as
this would force water past the door seals
and the nozzle should never be directed at
the windows as it can scratch them. Do not
direct onto wheel bearings or brakes.
8.4 ACRYLIC WINDOWS
8.4.1 CLEANING THE WINDOWS
With a little care your windows will remain
clear and scratch-free.
• Use copious quantities of water to rinse dirt
from your window.
• Use a chamois leather or soft dry cloth to
dry your windows.
DON’TS:
• Do not use a sponge or dry cloth until the
window has been rinsed with water.
• Under no circumstances use abrasive and
corrosive substances such as: alcohol,
turpentine, dry-cleaning naphtha, fly spray,
acetone, dishwasher detergents or solvents.
• Do not use a high-pressure power washer
for cleaning your windows.
• Never drive your trailer through a carwash.
The rotating brushes can cause scratches
on the acrylic.
8.4.2 WINDOW
MAINTENANCE
The windows should also be inspected during
the annual service of your vehicle.
• Shallow scratches can be removed using
the Polyplastic Acrylic Polish that is
available from your dealer. (Item no.
09.00.880.00.00.01.000)
• For deeper scratches please refer to
your dealer or an appropriately certified
specialist.
• Use talcum powder or another approved
maintenance agent to keep the rubber in
optimum condition.
• Like all other materials acrylic is also
susceptible to UV discolouration.
Remember that there may be some colour
difference when replacing a window.
• Hairline cracks in acrylic can only occur
if your window comes into contact with
a non-approved cleaning agent. This will
make the guarantee void.
Do not use any agents containing silicones
for maintaining the rubber.
8.5 HINGES & CATCHES
Lightly oil occasionally.
