Automatic starting point function
Step :
Insert the battery and close the battery cover. Press and hold “On”
switch for at least two seconds until the four indicator lights flash three
times (green light), after which the pan head will begin to move to the
direction as shown in the chart.
*The carriage will stop automatically 10mm from the left foot stand.(The 1 axis
slide module is equipped with a sensor which will move to the starting point
and stop automatically)
*For maximum run time, please ensure that you run the single axis module on
a fully charged battery.
Installation guide
Automatic Sensor
Automatic Sensor
Automatic Sensor
Automatic Sensor
