6
Setup
Remove all packing materials from the fog machine. Check that all foam and plastic padding is
removed, especially in the nozzle area.
Fill with high-quality water-based fog fluid. Any other types of fluid can damage the unit. When
filled, place cap back on the liquid tank.
Firmly connect the remote control to the proper input on the rear of the machine.
Operation
Plug power cord into a grounded electrical outlet. Then turn on the power switch on the rear of the
unit. The machine starts to warm up and the red lamp on the remote control will be on . When
warm-up is complete the red lamp is off.
To emit fog, press the button on the remote and hold for the desired length of time.
The remote unit’s lamp will cycle on and off as the machine re-heats to the proper operating
temperature.
For further information on operating your I-180 fog machine, see the section titled, “Remote
Control Operation”.
Installation
The I-180 fog machine includes a mounting bracket designed for overhead installation. This bracket
allows the unit to be hung from lighting equipment trussing or other suitable supports.
The unit can also be operated at floor level or sitting on any regular surface as well.
If the unit is to be mounted with the hanging bracket, it is important not to point the nozzle in a
direction that will aim directly at a person.
Whatever installation method you choose, do not allow the unit to have more than a 15 degree angle
of inclination.
Summary of Contents for I-180
Page 1: ...1 I 180 FOG MACHINE USER MANUAL English...
Page 2: ...2...