Gateway
ZB0929
5
3 Safety instructions
•
The unit described is a subcomponent for integration into a system.
– The system architect is responsible for the safety of the system.
– The system architect undertakes to perform a risk assessment and to create documentation in
accordance with legal and normative requirements to be provided to the operator and user of
the system. This documentation must contain all necessary information and safety instructions
for the operator, the user and, if applicable, for any service personnel authorised by the
architect of the system.
•
Read this document before setting up the product and keep it during the entire service life.
•
The product must be suitable for the corresponding applications and environmental conditions
without any restrictions.
•
Only use the product for its intended purpose (
Ò
Intended use).
•
If the operating instructions or the technical data are not adhered to, personal injury and/or damage
to property may occur.
•
The manufacturer assumes no liability or warranty for any consequences caused by tampering with
the product or incorrect use by the operator.
•
Installation, electrical connection, set-up, operation and maintenance of the product must be
carried out by qualified personnel authorised by the machine operator.
•
Protect units and cables against damage.
3.1 Interference with medical devices
The device emits radio waves that may interfere with the operation of electronic devices in the vicinity,
including pacemakers, hearing aids and defibrillators.
If you have a pacemaker or other implanted medical product, do not use the device without first
consulting your doctor or the manufacturer of your medical product. Keep a safe distance between the
device and your medical devices and refrain from further use of the device if you observe permanent
impairment of your medical product.
