3
UK
4 Installation
►
Mount only in a thick housing wall
(e.g. transport thread).
►
Ensure that the signal direction is
correct.
►
Ensure a safe vibration
transmission and allow no elastic
intermediate layers.
1: Tighten the sensor with a tightening torque of 8 Nm.
5 Electrical connection
The unit must be connected by a qualified electrician. The national and
international regulations for the installation of electrical equipment must be
adhered to.
M12
2
4
3
1
Pin 1: not connected
Pin 2: I
out
Pin 3: not connected
Pin 4: L-
5.1 Measuring range
Measuring range
g
± 50
Measuring sensitivity
mV/g
100 ± 5 %
Frequency range
Hz
2...14000 ± 5 %
