![background image](http://html.mh-extra.com/html/ifm/tcc5-series/tcc5-series_operating-instructions-manual_620866019.webp)
19
UK
Displays /
commands
Explanation
Simulation
Simulation of temperature measurement (measuring element
and reference element) and diagnostic cases without opera-
Protocols
(log entries)
-Device status
-Detailed device status
-Event history
-Operating hours since first set-up
-Operating hours history memory (sampling rate 1 s)
-Internal temperature
-Parameter configuration faults
Binary file transfer
(BLOB)
Command for storing a log file on all calibration check warn-
ings or events
�
10 Operation
When the supply voltage is applied, the unit is in the RUN mode after a power-on
delay time of 6 s (= normal operating mode)� It carries out its measurement and
evaluation functions and provides output signals according to the set parameters�
11 Technical data
→ Technical data at www.ifm.co.
12 Troubleshooting
The unit has many self-diagnostic options� It monitors itself automatically during
operation
�
Diagnostic messages are indicated via the LED (LED blue = warning; LED red =
alarm)�
These messages are also available via IO-Link�
►
Connect the unit to a PC and read it via the IO-Link interface�
►
Carry out corrective measures to restore normal operation�