SmartPLC DataLine with EtherNet/IP device interface
191
>
8.7.6
EtherNet/IP projection software: Programmers' notes
Content
Registration of the EDS file ..................................................................................................................191
Integrate the Device into the EtherNet/IP project .................................................................................192
Configuration mode ..............................................................................................................................193
41549
>
Registration of the EDS file
41776
ifm provides an EDS file to integrate the AC1423/24 in a EtherNet/IP projection software. The EDS file
is stored on the device. In the EDS file, all parameters, process data, and their valid value ranges are
defined.
To add the AC1423/24 to the device catalogue of RSLogix 5000:
►
Download and unpack the ESD file (→
Download the device and I/O description
►
Start RSLogix 5000.
►
Select [Tools] > [EDS Hardware Installation Tool].
>
EDS Wizard appears.
►
Register the downloaded EDS file of the AC1423/24 with the EDS Wizard.
>
EDS Wizard installs the EDS file and adds the AC1423/24 to the device catalogue.
