18
necessary information about the required IO-Link hardware and software can be
found at www�ifm�com�
5 Installation
CAUTION
If the medium temperature is above 50 °C (122 °F) parts of the
housing can increase in temperature to over 65 °C (149 °F)�
> Risk of burns�
►
Protect the housing against contact with flammable substances
and unintentional contact�
►
Apply the supplied warning label to the sensor cable�
►
Ensure that the system is free of pressure during installation�
►
Ensure that no media can leak at the mounting location during installa-
tion�
►
Avoid deposits, accumulated gas and air in the pipe system�
The unit can be installed independently of the orientation if the following is
ensured:
-No air bubbles can form in the pipe system�
-The pipes are always completely filled�
5.1 Recommended mounting position
►
To ensure best possible empty pipe detection, install the unit according
to Figure 1�
Example of an optimised installation:
F
1
