SBU3xx
Mechatronic flow sensor
6
4 Mounting
CAUTION
During installation or in case of a fault (e.g. housing damage) media under high pressure or
hot media can leak from the system.
w
Risk of injury caused by pressure or burns.
u
Ensure that the system is free of pressure during installation.
u
Ensure that no media can leak at the mounting location during installation.
u
Equip the unit with suitable protection (e.g. cover) to avoid hazard to personnel from
leaking media.
4.1 Process connection
The unit provides 5 connections for pipe thread G ½.
1
IN
OUT1
G
2
1
OUT2
G
2
1
G
2
1
G
2
1
OUT3
G
2
1
Fig. 1: Process connection
1:
Connection for additional sensor
2:
Inlet
OUT1…OUT3:
3 x outlet for different connection types
The connections 1, OUT2 and OUT3 are equipped with sealing plugs on delivery.
u
Remove the sealing plugs if required.
Calming sections on the sensor's inlet or outlet side are not necessary.
