![background image](http://html1.mh-extra.com/html/ifm/saxx20/saxx20_operating-instructions-manual_3942279034.webp)
34
For flow measurement the following applies:
FEP1x is only available if the operating mode GAS is selected.
u
Select [FrPx] and set the maximum frequency: 100 Hz...1000 Hz.
11.3.4 Analogue signal OUT2
u
Select the CFG menu.
u
Select [ou2] and set the function:
I: flow-proportional current signal 4…20 mA.
u
Select the main menu.
u
Select [ASP2] and set the measurement value at which the output signal is 4
mA.
u
Select [AEP2] and set the measurement value at which the output signal is 20
mA.
For flow measurement the following applies:
ASP2 and AEP2 are only available if the operating mode GAS is selected.
11.4 User settings (optional)
11.4.1 Standard display
u
Select the DIS menu.
u
Select [SELd] and set the standard unit of measurement:
• FLOW: The current flow in the standard unit of measurement is displayed.
• TEMP: The current medium temperature in °C is displayed.
u
Select [diS] and set the update rate and orientation of the display:
• d1, d2, d3: update of the measured values every 50, 200, 600 ms.
• rd1, rd2, rd3: display as with d1, d2, d3; rotated by 180°.
• OFF: The process value display is deactivated in the RUN mode.
The LEDs remain active even if the display is deactivated. Error messages
are displayed even if the display is deactivated.
11.4.2 Display colour setting
u
Select the DIS menu.