PI17xx
Electronic pressure sensor
30
10 Operation
After power-on and expiry of the power-on delay time of approx. 0.5 s the unit is in the RUN mode (=
normal operating mode). It carries out its measurement and evaluation functions and generates output
signals according to the set parameters.
10.1 Read set parameters
u
Press [Enter].
u
Press [▲] or [▼] until the required parameter is displayed.
u
Briefly press [Enter].
w
The unit displays the corresponding parameter value for approx. 30 s; then it changes to the
process value display.
Alternative to the 30 s waiting time:
u
Cancellation of display: Press [▲] + [▼] simultaneously.
w
The waiting time of 30 s is omitted.
10.2 Change the display in the Run mode
Activation of the display when the display is in OFF mode:
u
Briefly press [Enter].
w
The unit displays the current measured value in the selected type of display for approx. 30 s:
