![background image](http://html1.mh-extra.com/html/ifm/oj50-laser-series/oj50-laser-series_operating-instructions-manual_3915967006.webp)
6
4.2 Installation of the supplied mounting fixture
►
Secure the mounting fixture with the screws supplied, then slide the unit into the slot of
the fixture until the spring clicks home
►
To remove the unit press the spring down with a screwdriver and slide the unit out
5 Electrical connection
The unit must be connected by a qualified electrician
►
The national and international regulations for the installation of electri-
cal equipment must be adhered to
►
Voltage supply according to EN 50178
►
Disconnect power
►
Connect the unit as follows:
DC PNP
DC NPN
L
L+
3
2
4
1
teach
L
L+
3
2
4
1
teach
Programming of the output function by pushbutton or programming wire
(→ 6.4
Programming the output function
)