4
Receiver cable *
BN = L+
BU = L-
BK = load
* Core colours: BN = brown, BU = blue, BK = black
6 Setting
6.1 Sensitivity setting
The sensor is to switch when the object is detected
1
►
Position the object.
receiver
transmitter
►
Press [OUT on] for 2 s.
> The sensitivity is set to the object. The yellow LED flashes.
2
►
Remove the object.
receiver
transmitter
►
Press [OUT off].
> The sensitivity is set without object.
> The yellow LED goes out. The setting operation is completed.
The sensor is not to switch when the object is detected
►
Position the object (see figure 1) and press [OUT off].
►
Remove the object (see figure 2) and press [OUT on].
You can carry out the setting first without object and then with object.
6.2 Setting of maximum sensitivity
►
Interrupt the light beam.
The sensor is to switch when the object is detected.
►
First press [OUT on], then [OUT off].
