23
3D camera O3X1xx
UK
Default values of Device Config parameters
The default values of the device configuration parameters are:
Parameter name
Data type
Default value
Name
String (utf8)
"New sensor"
Description
String (utf8)
""
SessionTimeout
Int
*has limits
30
IPAddressConfig
Int
0
PasswordActivated
Bool
false
OperatingMode
Int
0
For all other device config parameters there are no defined default values, because they
are either device-dependent (DeviceType, ArticleNumber, ArticleStatus) or volatile (UpTime,
ImageTimestampReference).
Minimum and maximum values of Device Config parameters
The minimum and maximum values of the device configuration parameters are:
Parameter name
Minimum value
Maximum value
SessionTimeout
5
300
6.6
Device/Network Config Object
saveAndActivateConfig
Method name
saveAndActivateConfig
Description
Reinitialise the network interface so that it uses the configuration
which was set by the other RPC methods.
There will be no XMLRPC reply, because the network interface is
instantly reset.
Input parameters
none
Output parameters
Empty string (compatibility with classic XmlRPC-client)
Parameters of Device/Network Config
Methods for parameter access are defined here:
Parameter name
Data type
Description
StaticIPv4Address
String (utf8)
IPv4 address of the device. Only used if DHCP is
disabled and if there is no temporary IP address set
via discovery.
Only numeric IPv4 addresses in quad-dotted notation
are allowed (e.g. "192.168.0.69")
StaticIPv4SubNetMask
String (utf8)
IPv4 network mask of the device.
Only numeric IPv4 addresses in quad-dotted notation
are allowed (e.g. "255.255.255.0").
StaticIPv4Gateway
String (utf8)
IPv4 gateway of the device.
Only numeric IPv4 addresses in quad-dotted notation
are allowed (e.g. "192.168.0.69").
UseDHCP
Bool
Selects whether the network should be configured via
DHCP.