ifm Vision Assistant 3D camera O3X1xx
30
6.3 Quit the monitoring window
The monitoring window can be quit in the following ways:
●
Change to the application or the device setup . When changing to the device setup, the application is
stopped. The change can be protected by a password (→
„8 .1 .2 Password protection“) .
●
Disconnect the ifm Vision Assistant from the device . The application is not interrupted and continues .
Change to another option
►
Click on the required button in the navigation area .
> The window "Stopping Run Mode" appears .
►
Click on [OK] .
> If the password protection has been activated, the ifm Vision Assistant asks for the password .
If the device is protected by a password, the icon is shown next to the buttons
and
.
►
Enter the password and click on [Unlock] .
> The ifm Vision Assistant stops the application and changes to the option that has been selected .
> Entering a wrong password triggers an error message and the ifm Vision Assistant returns to the
monitoring window .
Disconnecting the device
►
Click on
.
> The device is disconnected .
> The ifm Vision Assistant returns to the start screen .