43
O3M area surveillance
UK
10.2 Monitoring mode
After set-up, a function test must be carried out�
►
Drive towards an object at typical speed and check the reaction of the system�
Once the area surveillance has been set, the system is ready for operation and runs in monitoring mode�
The readiness for operation of the system is signalled by the live ticker� The live ticker is the rotating circle
at the top right of the live image of the E2M monitor (see Fig. 20).
The buzzer reacts according to the setting� The BasicDisplay shows on the screen in which zone an
object has been detected� If the E2M monitor is connected, the risk level and the distance to the detected
object are displayed there�
Exiting the monitoring mode:
► Press the 4 function keys simultaneously (→ "9 Operating and display elements").
Risk level 1
Risk level 2
Risk level 3
ok
ok
ok
ok
System läuft
und ist verfügbar
CAUTION!
Object detected.
WARNING!
SLOW!
DANGER!
STOP!
ok
ok
ok
ok
System läuft
und ist verfügbar
CAUTION!
Object detected.
WARNING!
SLOW!
DANGER!
STOP!
ok
ok
ok
ok
System läuft
und ist verfügbar
CAUTION!
Object detected.
WARNING!
SLOW!
DANGER!
STOP!
●
The detected object
is highlighted in the
colour of the zone�
●
The distance to the
object is indicated at
the top centre�
●
The colour of the
zone is displayed as a
frame around the live
image�
●
The buzzer emits
a low-frequency
warning tone�
●
The detected object
is highlighted in the
colour of the zone�
●
The distance to the
object is indicated at
the top centre�
●
The colour of the
zone is displayed as a
frame around the live
image�
●
The buzzer emits
a high-frequency
warning tone�
●
The detected object
is highlighted in the
colour of the zone�
●
The distance to the
object is indicated at
the top centre�
●
The colour of the
zone is displayed as a
frame around the live
image�
●
The buzzer emits a
continuous tone�
Fig� 20
: Risk levels on the BasicDisplay (top) and E2M monitor (bottom)