7
UK
6 Installation
6.1 Mounting dimensions
The E2M210 mounting set has a borehole spacing of 25 mm� Installation
is effected via the 2 supplied M6 screws�
Scale drawings and technical data: www�ifm�com
6.2 Mounting and adjustment of the device
► Determine a suitable installation location (→ 6.3 Installation location).
►
Bore the holes for the lower part of the E2M210 mounting set�
> Borehole spacing: 25 mm
►
Fix the lower part of the mounting set with the M6 screws, washers
and self-locking nuts supplied with the unit�
>
Max. tightening torque: 11 Nm (± 1 Nm)
►
Place the anti-slide pad
②
in the lower part�
►
Place the device in the lower part of the mounting set� Fix the upper
part with the supplied M3 socket head screws�
►
Align the device to the area to be monitored�
►
Fix the mounting set with a max� tightening torque of 0�8���1 Nm�
►
Drill a hole of d = 19 mm for the supply cable�