4
2 Safety instructions
• The device described is a subcomponent for integration into a system�
-The system architect is responsible for the safety of the system�
-The system architect undertakes to perform a risk assessment and
to create documentation in accordance with legal and normative
requirements to be provided to the operator and user of the system�
This documentation must contain all necessary information and
safety instructions for the operator, the user and, if applicable, for any
service personnel authorised by the architect of the system�
• Read this document before setting up the product and keep it during
the entire service life�
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
•
Only use the product for its intended purpose (→ Functions and
features).
• If the operating instructions or the technical data are not adhered to,
personal injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any conse-
quences caused by tampering with the product or incorrect use by the
operator�
• Installation, electrical connection, set-up, operation and maintenance
of the product must be carried out by qualified personnel authorised by
the machine operator�
• Protect units and cables against damage�