19
UK
8.1 Set parameters of the device
The device parameters can be set in two ways:
•
ifm Vision Assistant software (→ see software manual)
•
The ifm Vision Assistant software and the software manual are available on
the internet: www�ifm�com
8.2 Detect object
3
2
1
The following recommendations increase the
frame rate:
►
place the object
③
in the field of view
②
►
remove other objects from the field of view
►
for objects
③
with shiny surface:
- slightly tilt the device
①
or
- use the polarisation filter (only available in
O2I5x0, O2I5x2 and O2I5x4)�
►
clean the front lens of the device
①
�
► Observe the notes on the installation (→ 5).
Fig� 11: Detect objects
9 Maintenance, repair and disposal
If used correctly, no maintenance and repair measures are necessary�
►
The device must only be repaired by the manufacturer�
►
After use dispose of the device in an environmentally friendly way in
accordance with the applicable national regulations�
►
Keep the front lens free from soiling�
> Soiling reduces the contrast and the recognition performance�
►
Use glass cleaner as cleaning agent�
> Cleaning agents containing solvents can damage the front glass�
►
Do not open the device�
> The device must only be used by the manufacturer� To replace the device, the