3
UK
2 Safety instructions
• The device described is a subcomponent for integration into a system�
-The manufacturer of the system is responsible for the safety of the system�
-The system manufacturer undertakes to perform a risk assessment and to
create a documentation in accordance with legal and normative requirements
to be provided to the operator and user of the system� This documentation
must contain all necessary information and safety instructions for the operator,
the user and, if applicable, for any service personnel authorised by the
manufacturer of the system�
• Read this document before setting up the product and keep it during the entire
service life�
• The product must be suitable for the corresponding applications and
environmental conditions without any restrictions�
•
Only use the product for its intended purpose (→ Functions and features).
•
Only use the product for permissible media (→ Technical data).
• If the operating instructions or the technical data are not adhered to, personal
injury and/or damage to property may occur�
• The manufacturer assumes no liability or warranty for any consequences
caused by tampering with the product or incorrect use by the operator�
• Installation, electrical connection, set-up, operation and maintenance of the unit
must be carried out by qualified personnel authorised by the machine operator�
• Protect units and cables against damage�
• The unit complies with the standard EN 61000-6-4� In domestic areas
(EN 61000-6-3) the unit must be installed in closed metal tanks / pipes.
