KB / KD / KI
Capacitive sensor
10
6 Settings
6.1 Sensing range
u
Set the sensing range via the potentiometer using a screwdriver.
2
1
1: Increase the sensing range
2: Reduce the sensing range
6.2 Setting the output function via wire link for type KI with
connector
2
1
Fig. 13: Setting the output function via the link in the connector
1: NO (factory setting)
2: NC
6.3 Setting the output function via wire link for type KIE / KGE
2
1
Fig. 14: Setting the output function via the wire link
1: NO (wire link closed, factory setting)
2: NC (wire link open)
u
Use an appropriate tool to disconnect the wire link.
