8
0
S
ao
1:
Typical switch-on curve
(for slow approach)
2:
Typical switch-off curve
(for slow approach)
3:
Poor repeatability
4:
Good repeatability
6 Mounting
The sensor can be mounted flush according to IEC 60947-5-2, type I2A12SP2.
u
Ensure that the device and the target cannot come loose.
u
Tighten the supplied fastening nuts to a maximum tightening torque of 7 Nm.
WARNING
Failure of the safety function
If the sensor or the target comes loose in its fixture, the sensor can
no longer fulfil its safety function.
u
The mounting position of the sensor must not change due to
mechanical stress, vibrations or temperature changes.
u
Ensure that the sensor and target are securely fastened.
Observe the following installation conditions (dimensions in mm):
1
2
3
12
32
24
8
12