IFM Efector 200 O4P5 Series Operating Instructions Download Page 4

Page: 4 / 5

Settings

Sensitivity setting

6.1
The sensor is to switch when the object is detected

Position the object.

►

Press [OUT on] for 2 s.

►

The sensitivity is set to the object. The LED flashes.

Remove the object.

►

Press [OUT off].

►

The sensitivity is set without object.

The LED goes out. The setting operation is completed.

The sensor is not to switch when the object is detected

Position the object (see figure 1) and press [OUT off].

►

Remove the object (see figure 2) and press [OUT on].

►

The settings can also be carried out first without object (step 1) and then with
object (step 2).

Setting of maximum sensitivity

6.2

Align the sensor so that no light is reflected.

►

The sensor is to switch when the object is detected

First press [OUT on], then [OUT off].

►

The sensor is to switch when the object is not detected

First press [OUT off], then [OUT on].

►

Summary of Contents for Efector 200 O4P5 Series





