Adjustment mode empty state
The sensor is adjusted to the empty
vessel. If it detects material, the swit-
ched signal changes.
Then carry out steps 1 and 2.
Adjustment mode full state
Fill the vessel so that the sensor
detects the material.
11
1
2
Press the programming button for
max. 5s
Release the programming button
before the 5s have elapsed
The green LED flashes
(= the unit is in the
adjustment mode)
The green LED
is lit continuously
(= the unit is adjusted
and in the operating
mode)
Summary of Contents for Efector 150
Page 23: ...23 Notizen Notes ...
