CR1204
7
4 Installation
4.1 Mounting accessories
The unit is supplied without mounting accessories.
Depending on the intended installation location and type of mounting, the following mounting
accessories are available:
•
EC0732, installation kit for panel mounting
•
EC1410...EC1414, RAM® mount system for surface mounting
More information about available accessories at
4.2 General installation instructions
The following applies to all types of mounting:
The responsibility for the compliance with the requirements concerning mounting of the device
in the application with regard to shock, vibration, acceleration and weight lies with the system
architect.
ATTENTION
Impact stress on display screen
w
Damage possible
w
Protection rating and electrical protection might be impaired
w
Risk of injury possible
u
If necessary, the system creator must take external measures to protect the device
depending on the requirements of the corresponding application.
u
Replace damaged devices, otherwise the technical data and safety will be impaired.
On the back, the pressure compensation element, the service cover and the connector areas
are to be protected by taking external measures, if necessary.
4.2.1 Location for mounting accessories
The back of the device has been prepared for fixing the mounting accessories.
