UK
Process and dialogue module ecomatDisplay CR1074, CR1075, CR1076, CR1077
13
4.3.3 Panel cut-out
►
Make a cut-out�
128
213
4 x R7
Tolerances: ± 0�5 mm
Panel cut-out
4.3.4 Mounting steps
►
Screw the set screws into the M5 thread on the back of the device�
(→ 4.2.1 Locator for mounting accessories)
►
Attach damping strips to the device�
Damping strips
►
Insert the device into the cut-out�
►
Insert the spacer suitable for the panel thickness�
The thickness of the spacers corresponds to the panel thickness� If necessary,
use several spacers on top of each other�
►
Screw the fixing profiles to the back of the device�
Tightening torque of the hexagon nuts: 5
±0,5
Nm
