ifm
Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15
2012-02-29
Menu
Main menu [Quick Setup]
219
9 Menu
Main menu [Quick Setup].......................................................................................................... 219
Main menu [Fieldbus Setup] ..................................................................................................... 220
4544
Info
All menu texts in this manual are in English.
Basic functions
separate basic instructions of the device manual
9.1
Main menu [Quick Setup]
10712
Setting and reading of the fieldbus parameters (password level 1 required).
Details
chapter
Setting and reading of the fieldbus parameters
(
→
page
)
Menu tree
Explanation
Quick setup
Fieldbus Setup
> Display of the current IP address
►
Change the fieldbus address using the keys [ ] / [ ]
►
After pressing [OK]:
> Display of the fieldbus baud rate
►
Change the fieldbus baud rate using the keys [ ] / [ ]
►
After pressing [OK]:
> Display of the fieldbus module 1
►
Change fieldbus module 1 using the keys [ ] / [ ]
►
After pressing [OK]:
> Display of the fieldbus module 2
> …
►
Change fieldbus module 19 using the keys [ ] / [ ]
►
After pressing [OK]:
> Display of the fieldbus module 1
> …
►
After pressing [ESC] twice:
> Return to the start screen
