IFM Ecomat 300 AC1318, Supplementary Device Manual

Page: 129 / 243

ifm Supplementary device manual DeviceNet interface in the AS-i ControllerE (AC1318, AC1324), Target from 15 2012-02-29
The host command channel Commands in the host command channel
129
Module 19, command 102dec (66hex) – retrieve the status of the device display................... 209
Module 19, command 105dec (69hex) – read the properties of the device.............................. 215
4508
7.2.1 Commands in the host command channel
10706
D examples

chapter
The host command channel
( → page 126 )
Command no. Description
0 execute no command
1 write parameters to a connected AS-i slave
3 adopt and save currently connected AS-i slaves in the configuration
4 change the list of projected AS-i slaves (LPS)
5 set the operating mode of the AS-i master
6 readdress a connected AS-i slave
7 set the auto addressing mode of the AS-i master
9 change the extended ID code 1 in the connected AS-i slave
10…20 adopt and save currently connected AS-i slaves in the configuration
28 deactivate the slave reset when changing to the protected mode
31 one-time execution of the "Extended safety monitor protocol" in the "Safety at work" monitor
21 read ID string of an AS-i slave with profile S-7.4
33 read diagnosis string of an AS-i slave with profile S-7.4
34 read parameter string of an AS-i slave with profile S-7.4
35 write parameter string of an AS-i slave with profile S-7.4
50 read current configuration AS-i slaves 0(A)...15(A)
51 read current configuration AS-i slaves 16(A)...31(A)
52 read current configuration AS-i slaves 0...15B
53 read current configuration AS-i slaves 16B...31B
54 read current parameters of a connected AS-i slave
55 read current AS-i slave lists
56 read projected configuration AS-i slaves 1(A)...15(A)
57 read projected configuration AS-i slaves 16(A)..31(A)
58 read projected configuration AS-i slaves 1B...15B
59 read projected configuration AS-i slaves 16B...31B
96 save data non-volatilely in the flash memory of the unit
97 carry out various settings in the device
102 retrieve the status of the device display
105 read the device properties