45
ifm
Programming Manual
ecomatmobile
CabinetController (CR0301) Runtime System V05
2016-04-21
Configurations
Set up the programming system
>
4.2
Set up the programming system
Set up the programming system manually .......................................................................................... 45
Set up the programming system via templates ................................................................................... 47
3968
>
4.2.1
Set up the programming system manually
Set up the target .................................................................................................................................. 45
Activate the PLC configuration (e.g. CR0033) .................................................................................... 46
3963
>
Set up the target
2687
11379
When creating a new project in CODESYS the target file corresponding to the device must be loaded.
► Select the requested target file in the dialogue window [Target Settings] in the menu
[Configuration].
>
The target file constitutes the interface to the hardware for the programming system.
>
At the same time, several important libraries and the PLC configuration are loaded when selecting
the target.
► If necessary, in the window [Target settings] > tab [Network functionality] > activate [Support
parameter manager] and / or activate [Support network variables].
► If necessary, remove the loaded (3S) libraries or complement them by further (ifm) libraries.
► Always complement the appropriate device library
ifm_CR0301_Vxxyyzz.LIB
manually!
Summary of Contents for Ecomat 100 Mobile CR0301
Page 212: ......
