Starter kit for ecomatController EC2121
9
>
2.3
Establish a connection between the controller and the PC
via Ethernet.
57260
>
2.3.1
Connect the controller and the PC
57261
To connect the controller to the PC:
► Connect the supplied network cable (Ethernet cable) to:
the interface
ETH0
of the controller
the Ethernet interface of the PC
>
The controller and PC are connected to the network cable.
>
2.3.2
Check and set the network settings of the PC
57262
Changes in the network settings of the PC require extended user rights.
Contact your system administrator.
To check and, if necessary, set the network settings of the PC:
► Switch on the PC.
