5
UK
2.2 Radio equipment
In general, radio equipment must not be used in the vicinity of petrol stations, fuel
depots, chemical plants or blasting operations�
►
Do not transport and store any flammable gases, liquids or explosive
substances near the device�
2.3 Interference of electronic and medical devices
Operation of the device can affect the function of electronic devices that are not
correctly shielded�
►
Disconnect the device in the vicinity of medical equipment�
►
Contact the manufacturer of the corresponding device in case of any
interference�
Because of the requirements for electromagnetic interference emissions, the
device is intended for use in industrial environments� The device is not suitable for
use in domestic areas�
The device may only be used under the operating conditions specified in
the data sheet�
3 Functions and features
In combination with the IO-Link master the read/write head DTI600 is used for
non-contact reading and writing of RFID tags that conform to the system (ID tags)�
The data is available as process data at the IO-Link interface�
4 Function
4.1 Operating principle
The ID tags are operated passively, i�e� without battery� The energy required for
operation is supplied by the read/write head�
The physical principle of the energy transfer is based on inductive coupling� The
integrated antenna coil in the read/write head generates a magnetic field which
partly penetrates the antenna coil of the ID tag� A voltage is generated by induction
that supplies the data carrier with energy�
