IFM DTC600 Operating Instructions Manual Download

Page: 58 / 61

The installation of the EDS file depends on the configuration tool.

Contact the manufacturer of the controller for more information.

The EDS files are supplied with 64-bit or 32-bit data types. The
controller determines whether 64-bit or 32-bit data types can be
processed.

Select the EDS file appropriate to the controller.

10 Maintenance, repair and disposal

The unit is maintenance-free.

Contact ifm in case of malfunction.

Do not open the housing as the unit does not contain any components which
can be maintained by the user. The unit must only be repaired by the
manufacturer.

Clean the device using a dry cloth.

Dispose of the unit in accordance with the national environmental regulations.

11 Approvals/standards

For approvals and standards, the following information is available:

• Test standards and regulations:

documentation.ifm.com

• EU declaration of conformity and approvals:

documentation.ifm.com

• Notes relevant for approval: Package insert of the device and

documentation.ifm.com

Summary of Contents for DTC600






























































Search results

Summary of Contents for DTC600

Reviews:

Related manuals for DTC600

Brands by name

Popular brands

IFM DTC600, Operating Instructions Manual

Search results

Summary of Contents for DTC600

Reviews:

Related manuals for DTC600

Brands by name

Popular brands