IFM CR711S, Original Programming Manual

Page: 46 / 205

46
ifm Programming Manual ecomatController/60-1 (CR711S) Operating System V2.5.0.n 2017-12-19
System description Hardware description
>
Output type OUT PWM-n-BRIDGE-A
23094
n = current rating
Example: n = 25

I
max
= 2.5 A
Binary output or
analogue output with pulse width modulation (PWM), optionally current-controlled (PWM
I
)
or bridge output (via PWM)
Block diagram
OUT PWM-n-A
OUT#### = connection of PWM output no. ####
(CR) = device
(1) = measured value (analogue)
(2) = measured value (binary)
Configure input
→ Chapter System configuration
Possible operating modes:

Binary output CSO (B
H
)

Binary output CSI (B
L
)

analogue output CSO with pulse width modulation (PWM
H
), current controlled (PWM
I
)

analogue output CSI with pulse width modulation (PWM
L
)

analogue output CSO with pulse width modulation, current-controlled (PWM
I
)

Pair of outputs as bridge with pulse width modulation (PWM)
Setting and measurement via :

FB
Output
(
→ p.
128 ) for binary output

FB
PWM1000
(
→ p.
156 ) for PWM

FB
CurrentControl
(
→ p.
153 ) for current control (PWM
I
)

FB
HBridge
(
→ p.
148 ) for bridge output