IFM CR711S, Original Programming Manual

Page: 45 / 205

45
ifm Programming Manual ecomatController/60-1 (CR711S) Operating System V2.5.0.n 2017-12-19
System description Hardware description
>
Output type OUT PWM-n-B
23093
n = current rating
Example: n = 25

I
max
= 2.5 A
Binary output or
analogue output with pulse width modulation (PWM)
Block diagram
OUT PWM-n-B
OUT#### = connection of PWM output no. ####
(CR) = device
(1) = measured value (binary)
U
ADC
= current mirror
Configure input
→ Chapter System configuration
Possible operating modes:

Binary output CSO (B
H
) with restricted current measurement

analogue output CSO witch pulse width modulation (PWM
H
), without current measurement
Setting and measurement via :

Function block
Output
(
→ p.
128 ) for binary output

Function block
PWM1000
(
→ p.
156 ) for PWM