UK
Installation instructions CANwireless CR3130/CR3131
13
7 Set-up
7.1 Necessary components
The following components are needed to configure and set up the device:
7.1.1 Hardware
●
CR313x CANwireless
Ensure that all components necessary for the device configuration are used
●
CANwireless antenna (art� no� EC2118, only for CR3131)
●
PC
●
CAN/PC interface (e�g� CAN/RS232 USB interface CANfox, art� no�: EC2112)
● CAN bus terminating resistors (2 x 120 Ω)
7.1.2 Software
Device configuration
●
ifm maintenance tool as from version V02�02�13
Device integration into the application program
●
CODESYS programming system
●
CANremote CODESYS client/gateway (optional)
●
Electronic data sheet (EDS) (optional)
7.1.3 Documentation
●
CODESYS programming manual
(alternatively as online help)
●
System manual of the controller used
(alternatively as online help)
The manuals are available on the internet in PDF format by entering the
corresponding article number:
www.ifm.com → Data sheet search → Article number → More information
Software, function libraries and manuals (as online help):
www.ifm.com → Service → Download → Systems for mobile machines*
*) Download area with registration
7.2 Connect the device
►
Connect the CANwireless antenna to the device (only CR3131)�
► Provide the CAN bus with 120 Ω terminating resistors.
►
Connect the CAN/PC interface with the CAN adapter cable to the device and
connect it to the PC�
►
Apply the supply voltage�