IFM BasicController CR0431, Programming Manual

Page: 63 / 228

63
ifm Programming Manual BasicController relay CR0431 v03.03.00 05 / 2018
ifm function elements ifm function elements for the device CR0431
CAN_SETDOWNLOADID
7516
= Set download ID
Unit type = function block (FB)
Unit is contained in the library
ifm_RawCAN_NT_Vxxyyzz.LIB
Symbol in CODESYS:
>
Description
7517
The download ID is required for data exchange when connecting the runtime system and the
CODESYS development environment. When the device is started the download ID is set with the
default value from the hardware configuration.
With CAN_SETDOWNLOADID this value can be set in the PLC program (e.g. using certain inputs).
The changed ID is also written into the hardware configuration.
>
Parameters of the inputs
7519
Parameter Data type Description
EXECUTE BOOL := FALSE FALSE  TRUE (edge):
execute function element once
otherwise: function element is not active
A function element already started is processed.
CHANNEL BYTE CAN interface (1...n) depending on the device
DOWNLOAD_ID BYTE 1...127 = set download ID
0 = read download ID
>
Parameters of the outputs
7520
Parameter Data type Description
RESULT BYTE feedback of the function block
(possible messages → following table)
Possible results for RESULT:
Value
dec | hex
Description
0 00 FB is inactive
1 01 function block execution completed without error
8 08 function block is active
242 F2 Error: setting is not possible