O System setup
(Setting of the gateway device)
∇
Input of the password to enable changes in the
system configuration
∇
Update of the gateway firmware (special pro-
gramming software required)
O System info
(Device information)
∇
Hardware and firmware version numbers of this
gateway
∇
Serial number of this gateway
∇
Current / maximum PLC cycle time
O Master setup
(AS-i master flags)
∇
Reading of the current AS-i configuration (config all)
∇
Changeover to the projection mode: configurati-
on of the AS-i system
∇
Changeover to the protected mode: standard
mode (the master monitors the configuration)
∇
Deactivation of the automatic AS-i slave addres-
sing in the protected mode
∇
Deactivation of the AS-i reset when exiting the
projection mode
∇
Display of the config error counter of the connec-
ted AS-i system
∇
Reset of the config error counter
∇
Display of the percentage fault rate of the
connected AS-i system
O Slave setup
(Details about the connected AS-i slaves)
∇
Digital or analogue inputs/outputs of the connec-
ted AS-i slaves
∇
Current and projected parameters of the connec-
ted AS-i slaves
∇
Current and projected I/O and ID codes of the
connected AS-i slaves
∇
Message faults in the communication to the
connected AS-i slaves
14
