AL4002
Remote I/O module 16 DI
22
9.1.3 Fieldbus: Read the interface configuration
u
Observe the notes on the configuration of the PROFINET interface: Configure the PROFINET
interface (
Available parameters:
Name
Description
Value range
Access
[ipaddress]
IP address of the PROFINET inter-
face
e.g. 192.100.0.10
0.0.0.0 (default)
ro
1
[subnetmask]
Subnet mask of the network segment
e.g. 255.255.255.0
0.0.0.0 (default)
ro
1
[ipdefaultgateway]
IP address of the network gateway
e.g. 192.100.0.1
0.0.0.0 (default)
ro
1
[macaddress]
MAC address of the Ethernet inter-
face
e.g. 00:02:01:0E:10:7F
ro
1
[hostname]
Name of the device in the PROFINET
network
e.g. al4x0x
ro
1
1
read only
Requirements:
ü
The parameter setting software has been started.
ü
The detailed view of the device is active.
u
Select the [fieldbussetup] > [network] menu.
w
The menu page displays the current configuration of the PROFINET interface.
9.1.4 Fieldbus: Read the connection status
Available information:
Name
Description
Value range
Access
[connectionstatus]
Status of the PROFINET connection
• Disconnected: not connected
• Connected: connected
ro
1
[fieldbusfirmware]
Firmware version of the PROFINET
stack
e.g. 5.4.0.3 (PROFINET IO Device)
ro
1
1
read only
Requirements:
ü
The parameter setting software has been started.
ü
The detailed view of the device is active.
u
Select the [fieldbussetup] menu.
w
The menu page displays the status of the PROFINET connection.
9.1.5 Ports: Configure input filters
u
Observe the notes on input filters: Digital input filters (
Available parameters:
Name
Description
Value range
Access
[pin2]/[debounce_time]
Pin 2: debounce time (= value *
0.1 ms)
• 0: 0 ms (default)
…
• 500: 50 ms
rw
1
