![background image](http://html1.mh-extra.com/html/ifm/al1330/al1330_operating-instructions-manual_3887894048.webp)
IO-Link master with EtherCAT interface DataLine 4 ports IP 65 / IP 66 / IP 67
48
>
9.2.7
Fieldbus: Configuring the fieldbus interface
33892
The AL1330 in das EtherCATnetwork can be integrated via the field bus interface (ports X21 / X22).
Substructure:
fieldbussetup
Available data points:
Name
Description
Access
../hostname
Name of the IO-Link master in the fieldbus project
rw
../fieldbusfirmware
Firmware version of the IO-Link master
r
../connectionstatus
Status of the connection to the EtherCAT network
r
r ... read only
rw ... read and write
>
9.2.8
IO-Link ports: Setting the operating mode of pin 4 (US)
59793
Substructure:
iolinkmaster/port[n]
(n = 1...4).
Available data points:
Name
Description
Access
../mode
Operating mode of the IO-Link port
rw*
../mastercycletime_preset
Cycle time of the data transfer at the IO-Link port (value in ms)
rw*
../mastercycletime_actual
Current cycle time of the data transfer at the IO-Link port (value in ms)
r
../comspeed
Data transfer rate of the IO-Link port
r
r ... read only
rw ... read and write
* ... only changeable, if the <Feldsbus> plc is not in RUNNING state