IFM AL1302 Operating Instructions Manual Download

Page: 66 / 105

IO-Link Master with PROFINET Interface DataLine 8 Ports IP 65 / IP 66 / IP 67

9.3.5

Configure IO-Link devices

52482

The AL1302 supports the configuration of the connected IO-Link devices via the PROFINET
application. The configurable parameters depend on the IO-Link device that is used.

Configurable parameters of the IO-Link devices:

→ IO Device Description (IODD) of the

IO-Link Devices

The following options are available:

Symbol (function block)

Description

Notes

IO_LINK_DEVICE (FB5001) Acyclic access to the

parameters of an IO-Link
device

Input parameter:



CAP: Access point for function
AL1302: AL1302: 0xB400



PORT: Slot/sub-slot of the IO-Link interface of the connected
IO-Link device
Port X01: 1
Port X02: 2
...
Port X08: 8



IOL_INDEX and IOL_SUBINDEX: Index and sub-index of
the parameter (depends on the IO-Link device:

→ IO Device

Description (IODD))

IOL_CALL (FB1)

Acyclic access to the
parameters of an IO-Link
devices (obsolete)

→ IO_LINK_DEVICE (FB5001)

Summary of Contents for AL1302










































































































Search results

Summary of Contents for AL1302

Reviews:

Related manuals for AL1302

Brands by name

Popular brands

IFM AL1302, Operating Instructions Manual

Search results

Summary of Contents for AL1302

Reviews:

Related manuals for AL1302

Brands by name

Popular brands