![background image](http://html1.mh-extra.com/html/ifm/al1302/al1302_operating-instructions-manual_3915929023.webp)
IO-Link Master with PROFINET Interface DataLine 8 Ports IP 65 / IP 66 / IP 67
23
8
Set-up
Content
Read device and diagnostic information ................................................................................................24
52357
When the supply voltage is switched on, the AL1302 starts with the factory settings. The display
elements signal the current operating mode (
→
Operating and display elements
(
To enable parameter setting of the AL1302, the IoT interface and / or the fieldbus interface must be
configured according to the network environment.
► Configure IoT interface (LR DEVICE: →
IoT: Configure IP settings
(
) or
→
Configure
IoT interface
(
► Configure fieldbus interface (LR DEVICE: →
Fieldbus: Configure IP settings
(
) or IoT:
→
Configure the fieldbus interface
(
>
IoT / fieldbus interface has valid IP settings.
>
User can set the parameters of the AL1302.
Further steps:
Optional: Update firmware of AL1302 (
→
Update firmware
(
Set the parameters of the AL1302 (
→
Configuration
(