IFM AL1301 Operating Instructions Manual Download Page 15

Page: 15 / 88

ifm

Operating Instructions IO-Link Master with PROFINET interface DataLine 4 Ports IP 65 / IP 66 / IP 67 / IP 69K (AL1301)

05 / 2018

Electrical connection

PROFINET ports

6.2

PROFINET ports

17849

► Connect the device via the M12 socket X21 and/or X22 to the

PROFINET network
(e.g. PROFINET PLC, additional PROFINET device)



Tightening torque: 0.6...0.8 Nm

► To connect the devices, use M12 connectors with protection rating

IP 65 / IP 66 / IP 67 / IP 69K or higher (

→

Accessories

(

→ p.

)).

► Cover the unused sockets with M12 protective caps (art no.

E12542).



Tightening torque 0.6...0.8 Nm

6.3

IoT port

11029

► Connect the device via the M12 socket X23 to the IT network (e.g.

laptop/PC with installed LR DEVICE parameter setting software,
laptop/PC with installed LR SMARTOBSERVER monitoring
software)



Tightening torque: 0.6...0.8 Nm

► To connect the devices, use M12 connectors with protection rating

IP 65 / IP 66 / IP 67 / IP 69K or higher (

→

Accessories

(

→ p.

)).

► Cover the unused sockets with M12 protective caps (art no.

E12542)



Tightening torque 0.6...0.8 Nm

Summary of Contents for AL1301

























































































Search results

Summary of Contents for AL1301

Reviews:

IFM AL1301, Operating Instructions Manual, Page: 15 / 88

Search results

Summary of Contents for AL1301

Reviews: