![background image](http://html.mh-extra.com/html/ifm/al1100/al1100_operating-instructions-manual_620802032.webp)
32
ifm
Operating Instructions IO-Link Master with Profinet interface StandardLine 4 Ports IP 65 / IP 67 (AL1100)
2017-08-18
Configuration
>
8.2
LR DEVICE: Configure the device
Set-up .....................................................................................................................................................33
Configure communication profile ............................................................................................................34
Configure the Ethernet interface ............................................................................................................35
Configure the interface to the SmartObserver........................................................................................36
Set the operating mode of the IO-Link ports ..........................................................................................37
Set device validation and data storage ..................................................................................................38
Reset IO-Link master to factory settings ................................................................................................40
22402
The IO-Link master and the IO-Link devices connected to the AL1100 can be configured with the ifm
software LR DEVICE.
Further information about operation and functions of the LR DEVICE parameter setting
software:
► Use the help function of the parameter setting software LR DEVICE!
In order to configure the AL1100 with the LR DEVICE.
►
Put AL1100 into operation (→
Set-up
(→ p.
►
Under [ONLINE]: Click on the AL1100.
>
LR DEVICE shows the following sections:
Section
Functions
[All]
all available functions
[Network]
→
Configure the Ethernet interface
(
→ p.
[LineRecorder]
→
Configure communication profile
(
→ p.
→
Configure the interface to the SmartObserver
(
→ p.
[Port x]*
→
Set the operating mode of the IO-Link ports
(
→ p.
→
Set device validation and data storage
(
→ p.
[Setup]
→
LR DEVICE: Read device information
(
→ p.
→
Reset IO-Link master to factory settings
(
→
Reboot the device
(
→ p.
* ... x = 1...4
Summary of Contents for AL1100
Page 78: ......