IFM AE1300, Operating Instructions Manual

Page: 35 / 47

edgeController
35
>
7.2.4 Configuring the connections
61316
Requirements:
•
The main set-up menu is active.
► Click on [Connection].
>
The menu page shows the available option:
▪
Configuring the Ethernet interfaces (
→ p.
35 )
▪
Selecting network services (
→ p.
36 )
>
Configuring the Ethernet interfaces
61317
Requirements:
•
The [Connection] menu page is active.
► [LAN & Ethernet]
>
The menu page shows the current IP settings of the Ethernet interfaces ETH0 and ETH1.
The unit cannot be used with activated bridge mode.
► Disable [Bridge Mode].
Available options:
•
Configuring the IP settings via DHCP (
→ p.
35 )
•
Configuring IP settings manually (
→ p.
35 )
>
Configuring the IP settings via DHCP
61318
Requirements:
•
The menu page [Connection] has been selected.
•
A DHCP server is enabled for automatic IP configuration.
► Select the required Ethernet interface.
► Enable [DHCP Mode].
>
The DHCP server configures the IP settings of the Ethernet interface.
>
IP settings are displayed.
>
Configuring IP settings manually
61319
Requirements:
•
The menu page [Connection] has been selected.
► Select the required Ethernet interface.
► Disable [DHCP Mode].
► Enter the IP address in [IP Address].
► Enter the network mask in [Netmask].
► Enter the IP address of the network gateway in [Gateway].
► Click on [APPLY] to save the changes.
>
The new IP settings are enabled.