![background image](http://html1.mh-extra.com/html/ifm/ac1401/ac1401_programming-manual_3896314057.webp)
57
ifm
Programming Manual AS-i Gateway AC14 (4.2.x)
12/2017
Operation
Display target visualisation
>
8.5
Display target visualisation
20256
After compilation of the project and download to the device the user has to start the target
visualisation:
CODESYS / higher-level Fieldbus controller:
►
Execute system command [Display target visualisation] (→ Device manual,
Command 0x0110 – Display target
visualisation
)
GUI / web interface:
►
Activate target visualisation via the menu (→ Device manual:
Show target visualisation
)
OR:
Switch between target visualisation and menu with the key combination [
] + [
].
If the device does not react to the pressing of [
] + [
], the key combination is deactivated.
► Activate the key combination with the system command [Display target visualisation].
After a restart of the device the menu view of the GUI appears by default.
► With the FB
ACnnnn_SysCmd
(
)execute the system command [Display target
visualisation] at the start of the PLC application.
Further information:
→ Device manual:
Command 0x0110 – Display target visualisation"