![background image](http://html1.mh-extra.com/html/ifm/ac1401/ac1401_programming-manual_3896314043.webp)
43
ifm
Programming Manual AS-i Gateway AC14 (4.2.x)
12/2017
Programming
Use visualisations
>
7.5.4
Configure visualisation
6953
In order to change the properties of the created visualisations, choose one of the following options:
Change properties of the web visualisation
(
Change the properties of the target visualisation
(
>
Change properties of the web visualisation
17065
To change the attributes of the web visualisation:
►
In device tree: Double click on [Web-Visualisierung]
>
The editor window shows attributes of the web visualisation:
►
Set the following values:
1. Field [Start Visualization]: Select the created web visualisation.
2. Field [Name of .htm file]: Enter name for HTML file (→ Note).
3. Area [Scaling Options]: Enter fixed width and height as shown.
In the field [Name of .htm file] enter the name by which the web visualisation is to be accessible in the web
browser (→
Display web visualisation
(→ p.
►
Use only lower case when entering the name!
►
Save the project to apply changes.