50
ifm
Programming Manual AS-i Gateway AC14 (4.2.x)
12/2017
Operation
Transfer CODESYS project to device
>
8.1.2
Download the application to the device
18593
To transfer the created application as boot project to the device:
Requirements:
>
Network path is set (→
Set communication path to PLC
(→ p.
>
Project tested.
>
All ifm system solutions stored on the devie are deleted (→ device manual:
Uninstall ifm apps
)
1 Build application
►
In the device tree: Highlightt application as active application.
►
Use [Build] > [Rebuild] to compile the active application.
>
CODESYS generates program code.
2 Load application on the device
►
Use [Online] > [Login] to connect with the device.
>
Active application is transfered to the device (download).
>
application on the device is in STOP state.
3 Create boot application
►
Use [Online] > [Create boot application] to make the application bootable.
>
application storage is non-volatile.
4 Start boot application
►
Use [Debug] > [Start] to start the application.
>
application goes to the RUN state.
>
8.1.3
Delete application from AS-i Gateway AC14
18030
To delete an application stored on the device:
1 Connect with the device
►
In the device tree: highlight application as active application.
►
Use [Online] > [Login] to establish connection to the device.
>
CODESYS is in the online mode.
2 Delete application
►
In the editor window: Select [Device] > [Applications] tab.
►
Press [Refresh List] to refresh the view.
>
List shows the applications that are stored on the device.
►
Delete all applications in the device with [Remove All].
OR:
Highlight requested application and press [Remove] to delete it from the device.
>
Selected application will be deleted.
