IFM Electronic VNB001, Operating Instructions Manual, Page: 17 / 27

17
UK
9.2 Parameter setting in general
During the parameter setting process the monitoring function of the unit is
maintained� It continues to monitor with the existing parameters until the
parameter setting has been completed�
3 steps must be taken for each parameter setting:
1
Select the parameter
► Press [Mode/Enter] until the reque-
sted parameter is displayed .
Mode/Enter Set
2 Set the parameter value
► Press [Set]�
> The current setting value of the
parameter is displayed�
► Press [Set] for 3 s�
► Setting of the decimal point (cc�
cc) and the sign by pressing [Set]
several times�
► Press [Mode/Enter] to confirm�
► Set an individual digit with [Set] and
confirm with [Mode/Enter]�
► Repeat with all digits�
Mode/Enter Set
3
Confirm the parameter value
► Press [Mode/Enter]�
> The parameter is displayed again�
The new setting value is saved�
Mode/Enter Set
Set other parameters
► Start again with step 1�
Change the operating mode
► Press [Mode/Enter] several times until the current measured value is displayed�
> The unit returns to the operating mode�
If no button is pressed within 30 s, the unit automatically returns to the operating mode�